Suchergebnisse für '30'

Name: Torx t handle hex key tool set
SKU: 351019
Head type: Torx
Type: Standard
Advantage: Double head available, wide range of use.

160264：
Special designe for uesing before installing the accurate engine.

160265：
BMW Double VANOS Master tool set contains a comprehensive set of tools to perform camshaft+VANOS timing on M52TU,M54,M56 Engines.

160266：
The engine timing tool set designed to set the twin camshaft on petrol engine of BMW MINI.

160268：
1.Contains the tools necessary to assemble and properly time the double VANOS camshaft adjustment unit found in 1998 and later 6 cylinder engines.
2.Special design for using before installing the accurate engine.

160269：
Master tool set contains a comprehensive set of tools to perform camshaft VANOS timing on M52TU,M54,M56 Engines.

160270:
1.Installing and removal of camshaft timing unit.
2.Checking and adjustment of timing.

160271：
1.Suitable for setting and locking VAG 3.0 V6 petrol engines.
2.Quad cam configuration drives all four camshafts from the crankshaft.
3.The engine timing tool set contains camshaft and crankshaft setting and locking tools plus camshaft sprocket adjusting tool,tension adjuster and tension locking pin.
4.Supplied with warning tags.

160272：
1.Extractor for the camshaft phasing gear with 5 and 6 spokes.
2.Pulling arms 17 and 23mm.
3.This cam sprocket puller is the 3rd essential tool required when replacing the timing belt in the Audi V6 and V8 engines.

160273：
This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.

1. The gear puller is made of 45 Carbon Steel.
2. The gear puller has a long wrench.
3. The three jaws gear puller makes the stress of the equipment balance.
4. The double holes gear puller can adjust the diameter.

160152:
1.Heavy duty drop forged, heat treated steel
2.Construction hardened and tempered

160153:
1.Mechanical puller set with 30-50mm and 50-75mm separators, and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
2.Supplied in carry-case.

160154:
1.Includes a Bearing Splitter with 4 capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom thread forcing screw.
2.Puller/Bearing set for tough jobs, up to 7-tons,and larger applications,and greater reach 8 to 16.
3.Capacity to remove steering stem bearing.

160155:
1.Mechanical puller set with 30-50mm and 50-75mm separators and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
3.Supplied in carry-case.