Suchergebnisse für 'thread repair'

160229:
1.12 pieces set with 10 interchangeable heads. And it offer a large coverage of disc brake calipers fitted to today's modern vehicles.
2.Kit includes both left and right hand piston retracting forcing screws.

160230:
Alloy steel,hardened and phosphate zinc finished contents.

160231:
13pcs basic set for setting back brake pistons.
1.right threaded wind back tool.
2.suitable for many car models.

160232:
1.This tool set is used to install new brake pads.It by winding the piston back into the caliper through the convenient T-bar rotation.
2.Piston retraction is smoothly completed without damaging the piston or boot.

160233:
Applications:
AlfaRomeo,Audi,BMW,Citroen,Fiat,Ford,GM,
Honda,Jeguar,Mazda,Mercedes,Mitsubishi,Nissan,
Opel,Peugeot,Renault,Rover,Saab,Seat,Skoda,Subaru,
Toyota,Vauxhall,Volkswagen and Volvo.

160234:
1.21 pieces set with 17 interchangeable heads. And it offer a large coverage of disc brake calipers.It is fitted to today's modern vehicles.
2.Kit includes both left and right hand piston retracting forcing screws.

160235/160236/160237:
1.For rotating pistons back into caliper to provide clearance for new pads.
2.Prevents damage to the piston and boot.

160184:
1.Large ball joint separator is designed for use on all cars and light trucks that have press-fit type ball joints.
2.For extracting work pieces without bore.
3.Valuable accessory for common press and pull sleeve sets.
4.Open c-shaped construction allows more flexible operation directly on vehicle compared to conventional press frames.
5.Magnetic holders on thrust plates for convenient working.
6.With impact quality M18 vibration spindle;The momentum produced by impact wrench acts like hammer strokes on the work piece,thus causing tight connections to break open can be converted for use with hydraulic spindle(un1.1/2"*16 thread),9"opening.

160186:
1.Low profile with three sizes of jaw,allows use on most modern cars and light commercial vehicles.
2.Features heavy-duty forged steel body and hardemed screw with thrust ball.
3.Supplied in carry-case.

160187:
This starter kit is the backbone to ball joint,U-joint,anchor pins,and many other general pressing operations.

160188:
This starter kit is the backbone to ball joint,U-joint,anchor pins,and many other general pressing operations.

160189:
1.The C-frame tool can be used alone to remove and universal joints.
2.Comes complete with an applicant cross reference and instructions in a blow-molded case.

160191:
This Ball Joint Removal Tool Set removes and installs the lower ball joints whilst insitu without removing parts,used for Mercedes-Benz(W220/W211/W230).

160152:
1.Heavy duty drop forged, heat treated steel
2.Construction hardened and tempered

160153:
1.Mechanical puller set with 30-50mm and 50-75mm separators, and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
2.Supplied in carry-case.

160154:
1.Includes a Bearing Splitter with 4 capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom thread forcing screw.
2.Puller/Bearing set for tough jobs, up to 7-tons,and larger applications,and greater reach 8 to 16.
3.Capacity to remove steering stem bearing.

160155:
1.Mechanical puller set with 30-50mm and 50-75mm separators and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
3.Supplied in carry-case.

Name: 13pcs multifunctional folding imperial hex key set
Square: 6.35
Sleeve: 6/8/9/10
Slotted: 3.0/4.0/5.0
Philips: Ph0/PH1/Ph2/PH3
Advantages: Compact shape, convenient storage, a variety of functions to switch.