Beschreibung
Details
Dry sanding with dust extractor description
Contents:
1x tool trolley,
1x dust extractor,
1x servosystem,
1x 6" orbital sander(5mm hole),
1x 6" orbital sander(3mm hole),
1x square sander,
1x two-in-one dust tube,
1x Y-type hose fitting,
100x abrasive paper,
1x vacuum sander(70x198mm), 1x dust suction pipe(5m),
1x 6" sanding block,
1x tray protection pad,
1x tray cushion
Dry sanding with dust extractor feature
1. It is convenient because of the four-wheel mobile that is not subject to site constraints.
2. Without the dirty water to can avoid to chapping hands especially in winter.
3. The most important with dust extractor is the best finishing treatment.
4. Without the water that the orange peel, air bubble, and sand mark are never appeared.
5. The dust extractor is more healthy that the machine is dustless.
6. It is humanized design that the sander will be delayed off several seconds when the machine is closed to clean the remaining dust.
7. It can place many repair tools in tool trolley to improve the efficiency.
Dry sanding with dust extractor advantage
The abrasive papers are kind of paper. They have a specific that easy to destroy with water. The wet sanding is never cut off from water. It means the abrasive paper will reduce the service life. Meanwhile, the work costs are increased. And the water will make the dust adsorb on the abrasive paper to reduce the effect of sanding. On the contrary, the dry sanding with dust extractor is well to collect dust. And without the water, the abrasive paper needn’t change with high frequently. The dust extractor is well to improve the work efficiency and reduce the work costs.