Search results for 'infrarouge lampe pour séchage de la peinture'

161045;
1.Cast puller yoke with forged separator.
2.10tonne hydraulic ram interxhangeable with other units in the series.
3.Supplied with 75-105mm bearing separator.
4.Maximum puller depth 420mm.

161046;
1.Forged steel bearing separator.
2.10ton Ram with enough force to remove most stubborn bearings,pulleys and shafts.
3.Packed in handraulic storage/carry-case.

161047
1.Supplied with 10tonne hydraulic ram.
2.Suitable for pulling commercial vehicle size bearings from 105-150mm.
3.Hydraulic ram interxhangeable with other sets in the range.
4.Maximum depth 420mm.Supplied in steel case.

160148
1.Forged steel 2-way yoke allows twin or triple leg pulls.
2.10ton Hydraulic power unit with tommy bar.
3.Suitable for pulling hubs,flanges,gears and bearings.
4.Supplied with 3*3 position puller arms and 3 sets of extension plates.
5.Maximum reach 250mm.

160149
1.Chromed,heat treated SAE1045 steel puller yoke with hydraulic ram.
2.Suitable for four and five stud hubs.
3.Hydraulic ram provides additional power to extract the most stubborn hubs.
4.Supplied in storage case.

160151
1.Readily adjustable sliding legs to pull wheel hubs more quicker & easier where the bolt circle does not exceed 7-1/2"(190.2mm) also removers press-fit rear break drums.
2. Striking handle & puller screw included.
3. Special designed to use on most models of car.
4. Provides a straight pull, will not distort wheel lugs.
5. Striking wrench and puller screw included.

Learn More

Name: Macplherson expander tool strut set
SKU: 138559
Content:
1PC-Telescopic Handle
1PC-Intermediate bearing
1PC-Clamping Plastic Jaw Protector
1PC-Clamping screw set (2PCS short screws)
1PC-Clamping screw set (2PCS long screws)
1PC-T Type Ball Allen Key

Learn More

The patented gear wrench ratcheting box end needs as 5angle of sweep to move a fastener. A standard 12 point box end wrench needs 30angleor 6 times as much room. The surface drive box end configuration virtually eliminates the rounding of fasteners. Extremely strong,gear wrench meets or exceeds ANSI, DIN and GB standard. All metal construction. Mirror、matt、golden plated and Chrome nickel black finish. fully hardened. Learn More

Name: Professional N52 N55 timing locking tool kit
SKU: 138106
Application:
135i: E82-N52
325i: E90-N52
523i: E60/E61-N52K/N53
530Li: F18-N52TU
630i: E63/E64-N52
730Li: E38-N52
125i: E82-N55
335Li: F35-N55
535iGT: F07-N55
X5 4.0ix: E70-N55

Learn More