Search results for '160'

160180:
Ball Joint Separator Set includes five popular tools used for servicing pitman arms,and ball joints,and tie rods on most vehicles.

160181:
1.Suitable for light commercial vehicles.
2.Specially designed to be operated manually.Or by 1.5 tonne hydraulic ram supplied.
3.Features a step down thread adaptor that allows fitting of the manual thrust screw.

160182:
1.Use to separate ball joints,tie rods,and Pitman arms.
2.Set contains two handles:Knurled handle allows use of a hammer.Smooth handle fits in a pneumatic hammer.

160183:
1.Feature three popular"pickle forks"in a blow-molded case.
2.Used to remove shock linkage ,tie rods,and ball joints.
3.Also for general service on many cars and light trucks.

160185:
1.Heavy-duty ball joint splitter suitable for HGV vehicles.
2.Specially designed to be operated manually.Or by 10 tonne hydraulic ram supplied.
3.Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram.

160190:
1.Constructed of forged carbon steel and a black oxide finish for toughness and durability. The ball joint set is designed to handle worksite abuse.
2.The ball joint adaptor set comes in a sturdy storage case for organization and transport.
3.Forged and heat treated and machined carbon steel. Black oxide finish.

160192:
1.Innovative quick change and simple action for suitable fork.
2.Enable operator to select correct jaw size without taking entire extractor to the vehicle.
3.Adjustable opening angle.

There are so many different types of products, you must be satisfied with it.

160264：
Special designe for uesing before installing the accurate engine.

160265：
BMW Double VANOS Master tool set contains a comprehensive set of tools to perform camshaft+VANOS timing on M52TU,M54,M56 Engines.

160266：
The engine timing tool set designed to set the twin camshaft on petrol engine of BMW MINI.

160268：
1.Contains the tools necessary to assemble and properly time the double VANOS camshaft adjustment unit found in 1998 and later 6 cylinder engines.
2.Special design for using before installing the accurate engine.

160269：
Master tool set contains a comprehensive set of tools to perform camshaft VANOS timing on M52TU,M54,M56 Engines.

160270:
1.Installing and removal of camshaft timing unit.
2.Checking and adjustment of timing.

160271：
1.Suitable for setting and locking VAG 3.0 V6 petrol engines.
2.Quad cam configuration drives all four camshafts from the crankshaft.
3.The engine timing tool set contains camshaft and crankshaft setting and locking tools plus camshaft sprocket adjusting tool,tension adjuster and tension locking pin.
4.Supplied with warning tags.

160272：
1.Extractor for the camshaft phasing gear with 5 and 6 spokes.
2.Pulling arms 17 and 23mm.
3.This cam sprocket puller is the 3rd essential tool required when replacing the timing belt in the Audi V6 and V8 engines.

160273：
This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.

160164:
1.This master combination puller set has all the pulling attachments for the many pulling applications on cars, trucks, farm equipmnt and other machinery.
2.Features two and three way internal and external heads,reversible cone,forcing screw and three different sets of legs.

160165:
1.For removal of stubborn air conditioning clutch pulleys.
2.Also used on many alternator,generator,power steering and so on.
3.Set includes drop-forged components:one 3/4"-16*5" live-center forcing screw, and 5-1/2" crossbar with three spread setting, and two pairs of jaws,and aclamp bolt.
4.Includes blow-molded plastic case.

160167:
Application also with workshop press+press frame.

160168:
1.Universal applications-Car-LCV
2.Supplied in mould storage case.

161069:
Application also with workshop press+press frame.

160170:
1.Up to date kit for the installation and removal of front hub bearings ,and don't need the need to dismantle the steering knuckle and strut assembly.
2.Fast and simple to use.
3.Suitable for most front wheel drive cars.
4.Heavy-duty steel drifts with black phosphate finish for corrosion resistance.
5.May be used with impact wrench.
6.Supplied in carry case.

160171:
1.Professional fitting direct on the vehicle(removal with existing wheel hub extractor or universal sliding hammer.)
2.Simple and safe handling.
3.Can also be optionally usd with a workshop press.