Search results for '601'

1. With low loss, high efficiency transformers, to ensure a strong and stable current output.
2. Equip anti-anti-pole device and the charge over-current autom-aticcircuit protection.
3. Strong new chassis: We cannot ignore the chassis structure, because to a large extent a direct impact on the use of quality, in line with principles of ventilation cooling airflow design, in line with principles of mechanics to make more effort moving.
4. These power supplies are applicable to startup and charging for gas or diesel generators of autos and ships.
5. There are a number of models of different powers for supporting startup or direct startup. Especially, higher charging current can be output for speed charging during auto maintenance. Among them, power supplies of 1500A and 1800A can be used for thermal grinding and serves as lead welding power supply.

160184:
1.Large ball joint separator is designed for use on all cars and light trucks that have press-fit type ball joints.
2.For extracting work pieces without bore.
3.Valuable accessory for common press and pull sleeve sets.
4.Open c-shaped construction allows more flexible operation directly on vehicle compared to conventional press frames.
5.Magnetic holders on thrust plates for convenient working.
6.With impact quality M18 vibration spindle;The momentum produced by impact wrench acts like hammer strokes on the work piece,thus causing tight connections to break open can be converted for use with hydraulic spindle(un1.1/2"*16 thread),9"opening.

160186:
1.Low profile with three sizes of jaw,allows use on most modern cars and light commercial vehicles.
2.Features heavy-duty forged steel body and hardemed screw with thrust ball.
3.Supplied in carry-case.

160187:
This starter kit is the backbone to ball joint,U-joint,anchor pins,and many other general pressing operations.

160188:
This starter kit is the backbone to ball joint,U-joint,anchor pins,and many other general pressing operations.

160189:
1.The C-frame tool can be used alone to remove and universal joints.
2.Comes complete with an applicant cross reference and instructions in a blow-molded case.

160191:
This Ball Joint Removal Tool Set removes and installs the lower ball joints whilst insitu without removing parts,used for Mercedes-Benz(W220/W211/W230).

160180:
Ball Joint Separator Set includes five popular tools used for servicing pitman arms,and ball joints,and tie rods on most vehicles.

160181:
1.Suitable for light commercial vehicles.
2.Specially designed to be operated manually.Or by 1.5 tonne hydraulic ram supplied.
3.Features a step down thread adaptor that allows fitting of the manual thrust screw.

160182:
1.Use to separate ball joints,tie rods,and Pitman arms.
2.Set contains two handles:Knurled handle allows use of a hammer.Smooth handle fits in a pneumatic hammer.

160183:
1.Feature three popular"pickle forks"in a blow-molded case.
2.Used to remove shock linkage ,tie rods,and ball joints.
3.Also for general service on many cars and light trucks.

160185:
1.Heavy-duty ball joint splitter suitable for HGV vehicles.
2.Specially designed to be operated manually.Or by 10 tonne hydraulic ram supplied.
3.Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram.

160190:
1.Constructed of forged carbon steel and a black oxide finish for toughness and durability. The ball joint set is designed to handle worksite abuse.
2.The ball joint adaptor set comes in a sturdy storage case for organization and transport.
3.Forged and heat treated and machined carbon steel. Black oxide finish.

160192:
1.Innovative quick change and simple action for suitable fork.
2.Enable operator to select correct jaw size without taking entire extractor to the vehicle.
3.Adjustable opening angle.

161072:
1.Suits most flywheel,transmission and alternator piolt bearings and bushes.
2.Jaws to suit ID capacities 1/2"(12mm) to 1-1/2"(38mm).
3.Supplied in carry-case.

161073:
1.Heavy-duty construction with locking feature. Its allowing the tool to be fastened securely to the wiper arm when before commencing pull.
2.Combination of swivel mounted thrust bearing and tommy bar on thrust bolt and allow even the most stubborn wiper arms to be lifted off their drives.
3.Suitable also for battery terminal and alternator bearing removal.

161074:
1.Removes objects (bearing,etc) in narrow place.Thin type 2 jaw gear puller(range:40-90mm) that can be used for many application.
2.Removes objects (bearing,etc) in narrow place.

161075:
1.This armature bearing puller is designed for armatures on cars, and electric power tools and other electrical products.
2.Supplied with lock on bolts to hold the puller legs into position.