Search results for 'rivet nut tools'

160180:
Ball Joint Separator Set includes five popular tools used for servicing pitman arms,and ball joints,and tie rods on most vehicles.

160181:
1.Suitable for light commercial vehicles.
2.Specially designed to be operated manually.Or by 1.5 tonne hydraulic ram supplied.
3.Features a step down thread adaptor that allows fitting of the manual thrust screw.

160182:
1.Use to separate ball joints,tie rods,and Pitman arms.
2.Set contains two handles:Knurled handle allows use of a hammer.Smooth handle fits in a pneumatic hammer.

160183:
1.Feature three popular"pickle forks"in a blow-molded case.
2.Used to remove shock linkage ,tie rods,and ball joints.
3.Also for general service on many cars and light trucks.

160185:
1.Heavy-duty ball joint splitter suitable for HGV vehicles.
2.Specially designed to be operated manually.Or by 10 tonne hydraulic ram supplied.
3.Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram.

160190:
1.Constructed of forged carbon steel and a black oxide finish for toughness and durability. The ball joint set is designed to handle worksite abuse.
2.The ball joint adaptor set comes in a sturdy storage case for organization and transport.
3.Forged and heat treated and machined carbon steel. Black oxide finish.

160192:
1.Innovative quick change and simple action for suitable fork.
2.Enable operator to select correct jaw size without taking entire extractor to the vehicle.
3.Adjustable opening angle.

160193:
1.Four collets which fit a wide range of applications.
2.Select the appropriate sized collet by comparing it with the application.
3.Insert the collet,expand it to fit the hole,then attach the slide hammer assembly.
4.Housed in a blow-molded plastic storage case.

160194:
Locking the nut to open 3-jaws and clip on the bearing and then use the slide hammer to pull out the bearing.

160195:
1.Comprehensive kit offering leg style and slide hammer pulling assemblies for use with expanding split collets.
2.Removes bearings easily where access is available in the centre of the bearing.
3.Collet expands and grips on the underside of the bearing.

160196:
1.Medium stroke 1.4kg slide hammer with 390mm shaft.
2.Bearing extractor collets with internal capacity from 9 to 34mm.
3.Supplied in carry-case.

160198:
1.Pulls flange-type rear axles and most front-wheel drive hubs.
2.Internal and external jaws provide a variety of combinations to pull bearings and gears and seals.
3.Two-and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
4.Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.

160199:
1.Suitable for the fast and safe removal of Bosch,Delphi,Denso and Siemens diesel injectors.
2.Ball joint allows hammer to be used in confined areas.
160200:
1.Use to remove stubborn diesel injector.
2.No need too remove cam cover and the use of slide hammer.
3.For mercedes C-class,Sprinter Vehicles and chrysler grand cherokee 27crd(00-)

160252:
when you want to replace the alternator or pulley,this socket can help you for removing and replacing the free wheel pulley .

160253:
1.Permits easy removal of freewheel alternator pulley,either on or off the vehicle.
2.Allows alternator shaft to be held while the pulley retainer is removed.
3.Incorporates a range of combination TRX-Star,Spline and hex adaptors to fit most alternators.
4.Supplied in carry-case.

160256：
1.Tool remains on the spring strut until all screwa are tightens,therefore no recalibration required.
2.Made of high quality aluminum.

160263：
Checking and adjustment of engine timing when installing and removal of camshaft timing unit.