Search results for 'brake bleeder tool'

160180:
Ball Joint Separator Set includes five popular tools used for servicing pitman arms,and ball joints,and tie rods on most vehicles.

160181:
1.Suitable for light commercial vehicles.
2.Specially designed to be operated manually.Or by 1.5 tonne hydraulic ram supplied.
3.Features a step down thread adaptor that allows fitting of the manual thrust screw.

160182:
1.Use to separate ball joints,tie rods,and Pitman arms.
2.Set contains two handles:Knurled handle allows use of a hammer.Smooth handle fits in a pneumatic hammer.

160183:
1.Feature three popular"pickle forks"in a blow-molded case.
2.Used to remove shock linkage ,tie rods,and ball joints.
3.Also for general service on many cars and light trucks.

160185:
1.Heavy-duty ball joint splitter suitable for HGV vehicles.
2.Specially designed to be operated manually.Or by 10 tonne hydraulic ram supplied.
3.Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram.

160190:
1.Constructed of forged carbon steel and a black oxide finish for toughness and durability. The ball joint set is designed to handle worksite abuse.
2.The ball joint adaptor set comes in a sturdy storage case for organization and transport.
3.Forged and heat treated and machined carbon steel. Black oxide finish.

160192:
1.Innovative quick change and simple action for suitable fork.
2.Enable operator to select correct jaw size without taking entire extractor to the vehicle.
3.Adjustable opening angle.

160184:
1.Large ball joint separator is designed for use on all cars and light trucks that have press-fit type ball joints.
2.For extracting work pieces without bore.
3.Valuable accessory for common press and pull sleeve sets.
4.Open c-shaped construction allows more flexible operation directly on vehicle compared to conventional press frames.
5.Magnetic holders on thrust plates for convenient working.
6.With impact quality M18 vibration spindle;The momentum produced by impact wrench acts like hammer strokes on the work piece,thus causing tight connections to break open can be converted for use with hydraulic spindle(un1.1/2"*16 thread),9"opening.

160186:
1.Low profile with three sizes of jaw,allows use on most modern cars and light commercial vehicles.
2.Features heavy-duty forged steel body and hardemed screw with thrust ball.
3.Supplied in carry-case.

160187:
This starter kit is the backbone to ball joint,U-joint,anchor pins,and many other general pressing operations.

160188:
This starter kit is the backbone to ball joint,U-joint,anchor pins,and many other general pressing operations.

160189:
1.The C-frame tool can be used alone to remove and universal joints.
2.Comes complete with an applicant cross reference and instructions in a blow-molded case.

160191:
This Ball Joint Removal Tool Set removes and installs the lower ball joints whilst insitu without removing parts,used for Mercedes-Benz(W220/W211/W230).

160201/160202:
Versatile puller capable of removing a wide variety of components having tapped pulling holes such as gears,pulleys etc.

160203:
Designed to remove and install the harmonic balancer on the most popular Chrysler,Hyundai,and Mazda engines.

160204:
1.Two-leg puller,with two pairs of legs and two thrust caps.
2.For use on GM(Vauxhall/Opel) and Ford vehicles.

160205:
1.Suitable for using when the space limited.
2.To change the parts easily for fitting the differernt cars.

160206:
1.This tool eases the removal of the harmonic damper pulleys found on many Chrysler,Ford,GM,Hyundai,
Mazda and Mitsubishi engines.
2.Low profile puller.
3.Time saving tool provides increased productivity.
4.Entire puller set comes packed in a handy blow molded case for ease of storage.

160207:
1.Used to pull the steering wheel from the column on 97 and later G.M. vehicles.
2.These legs are designed to fit in a double "D" shaped opening in the wheel.

160208:
1.This pulley puller set is perfect for mechanics both at home and in the professional auto shop to assist in pulley removal in a vehicle's pressed-on alternator and power steering mechanism.
2.Features include reversible split jaws to get easy access to the pump pulley flange.
3.This sets is a great aid in pulley removal on domestic cars and light-duty trucks!
4.Has reversible split jaws for easy access to pulley flange.

160229:
1.12 pieces set with 10 interchangeable heads. And it offer a large coverage of disc brake calipers fitted to today's modern vehicles.
2.Kit includes both left and right hand piston retracting forcing screws.

160230:
Alloy steel,hardened and phosphate zinc finished contents.

160231:
13pcs basic set for setting back brake pistons.
1.right threaded wind back tool.
2.suitable for many car models.

160232:
1.This tool set is used to install new brake pads.It by winding the piston back into the caliper through the convenient T-bar rotation.
2.Piston retraction is smoothly completed without damaging the piston or boot.

160233:
Applications:
AlfaRomeo,Audi,BMW,Citroen,Fiat,Ford,GM,
Honda,Jeguar,Mazda,Mercedes,Mitsubishi,Nissan,
Opel,Peugeot,Renault,Rover,Saab,Seat,Skoda,Subaru,
Toyota,Vauxhall,Volkswagen and Volvo.

160234:
1.21 pieces set with 17 interchangeable heads. And it offer a large coverage of disc brake calipers.It is fitted to today's modern vehicles.
2.Kit includes both left and right hand piston retracting forcing screws.

160235/160236/160237:
1.For rotating pistons back into caliper to provide clearance for new pads.
2.Prevents damage to the piston and boot.