Search results for 'brake bleeder tool'

160264：
Special designe for uesing before installing the accurate engine.

160265：
BMW Double VANOS Master tool set contains a comprehensive set of tools to perform camshaft+VANOS timing on M52TU,M54,M56 Engines.

160266：
The engine timing tool set designed to set the twin camshaft on petrol engine of BMW MINI.

160268：
1.Contains the tools necessary to assemble and properly time the double VANOS camshaft adjustment unit found in 1998 and later 6 cylinder engines.
2.Special design for using before installing the accurate engine.

160269：
Master tool set contains a comprehensive set of tools to perform camshaft VANOS timing on M52TU,M54,M56 Engines.

160270:
1.Installing and removal of camshaft timing unit.
2.Checking and adjustment of timing.

160271：
1.Suitable for setting and locking VAG 3.0 V6 petrol engines.
2.Quad cam configuration drives all four camshafts from the crankshaft.
3.The engine timing tool set contains camshaft and crankshaft setting and locking tools plus camshaft sprocket adjusting tool,tension adjuster and tension locking pin.
4.Supplied with warning tags.

160272：
1.Extractor for the camshaft phasing gear with 5 and 6 spokes.
2.Pulling arms 17 and 23mm.
3.This cam sprocket puller is the 3rd essential tool required when replacing the timing belt in the Audi V6 and V8 engines.

160273：
This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.

160274:
1.Installing and removal of camshaft/variable camshaft timing unit.
2.Checking and adjustment of timing.

160275:
The Engine Timing Tool Set includes adjusting gauge for camshaft,crankshaft,pumpshaft
complete classification chart included
for e.g:1.4ltr. + 1.6ltr 16V +1.7ltr. +1.8ltr.16V+2.0ltr.16V(also Zetec)-1.4lre.-1.6ltr.-1.8ltr.and 1.9 ltr.D/TD/TDCi

160276:
This new kit of twelve tools is required for petrol and diesel engine service including timing belt replacement on recent models and also older 1.9D models from 1976.

160277:
The Engine Timing Tool for fast and professional dis-assembly and assembly of SAC clutches-fits on nearly all SAC clutches with 3-and 4-hole pitch from VAG,MB,Opel Volvo,Renault etc.

160278:
1.For easy alignment and installation on the workbench.
2.Suitable for front wheel drive vehicles.

160280:
For replacing the cam belt on Ford Focus 1.6 TI-VCT engines,engine code HXDA(2003-2007) and 2.0 TDCI with engines codes G6DA,G6DB,G6DC 2003-2007

160281:
1.Necessary for pre-tensioning self adjusting clutches before removal or installation.
2.Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.
3.Features a refitting tool,allowing the clutch adjuster to be wound back,and six alignment adaptors.
4.Supplied in carry-case.

160282:
1.The Engine Timing Tool Set includes a removing flange, and plus forcing screws and adapter assemblies to remove and install virtually all virtually.
2.Includes blow-molded plastic case.

1.Chrome-vanadium
2.Chrome-plated
3.All tools steel

The set is packaged in a plastic case. This convenient product placement and reduce the rate of loss the tools. And it through special processing, so it is more hardness and durable. Each size of the sleeve head can be replaced, and the operation is simple. The use is flexible, and the scope of application is wide.Products suitable for various scenarios,car,bike, all kinds of mechanical maintenance. If you place the order, we will give you  the lowest price.