Search results for '150'

161045;
1.Cast puller yoke with forged separator.
2.10tonne hydraulic ram interxhangeable with other units in the series.
3.Supplied with 75-105mm bearing separator.
4.Maximum puller depth 420mm.

161046;
1.Forged steel bearing separator.
2.10ton Ram with enough force to remove most stubborn bearings,pulleys and shafts.
3.Packed in handraulic storage/carry-case.

161047
1.Supplied with 10tonne hydraulic ram.
2.Suitable for pulling commercial vehicle size bearings from 105-150mm.
3.Hydraulic ram interxhangeable with other sets in the range.
4.Maximum depth 420mm.Supplied in steel case.

160148
1.Forged steel 2-way yoke allows twin or triple leg pulls.
2.10ton Hydraulic power unit with tommy bar.
3.Suitable for pulling hubs,flanges,gears and bearings.
4.Supplied with 3*3 position puller arms and 3 sets of extension plates.
5.Maximum reach 250mm.

160149
1.Chromed,heat treated SAE1045 steel puller yoke with hydraulic ram.
2.Suitable for four and five stud hubs.
3.Hydraulic ram provides additional power to extract the most stubborn hubs.
4.Supplied in storage case.

160151
1.Readily adjustable sliding legs to pull wheel hubs more quicker & easier where the bolt circle does not exceed 7-1/2"(190.2mm) also removers press-fit rear break drums.
2. Striking handle & puller screw included.
3. Special designed to use on most models of car.
4. Provides a straight pull, will not distort wheel lugs.
5. Striking wrench and puller screw included.

160156:
 1.Fast and simple to use.
2.Suitable for most front wheel drive cars.
3.Heavy-duty steel drifts with black phosphate finish for corrosion resistance.
4.May be used with impact wrench.
5.Supplied in carry case.

160157:
1.As the spindle assembly without removed there is no need to align front end after the job is done.
2.Fit on most cars.
3.Could be worked with shop press also.

160159:
1.Quickly and easily to inserts bearing race.
2.Collars fit most standard wheel bearing size.
3.Help reduce damage to both race and axile housing.

160160:
1.Wheel Bearing Removal Tool Kit allows you to build your own custom bushing driver.
2.Select the required sizes and assemble your driver tool.
3.Build to suit the required seal,bush or bearing job.

160161:
1.This extra large driver set allows you to build your own custom bushing driver.
2.Select the required sizes and assemble your driver tool.
3.Discs are connected with a shaft and screw which connects to the driver handle.
4.Build to suit the required seal bush or bearing job.

160162:
1.Twin/triple leg puller set with reversible legs allowing internal and external pulling operations.
2.Supplied with two and three leg yokes.
3.Thrust bearing prevents wear and damage to shaft.
4.Hex head forcing screws suitable for use with a ratchet or spanner.

160163:
1.Compact set containing bearing separator,yoke and extensions.
2.Chrome Vanadium components ensure long tool life.
3.Also suitable for removing small gear,wheels and fittings from shafts.
4.Supplied in storage case.

160164:
1.This master combination puller set has all the pulling attachments for the many pulling applications on cars, trucks, farm equipmnt and other machinery.
2.Features two and three way internal and external heads,reversible cone,forcing screw and three different sets of legs.

160165:
1.For removal of stubborn air conditioning clutch pulleys.
2.Also used on many alternator,generator,power steering and so on.
3.Set includes drop-forged components:one 3/4"-16*5" live-center forcing screw, and 5-1/2" crossbar with three spread setting, and two pairs of jaws,and aclamp bolt.
4.Includes blow-molded plastic case.

160167:
Application also with workshop press+press frame.

160168:
1.Universal applications-Car-LCV
2.Supplied in mould storage case.

161069:
Application also with workshop press+press frame.

160170:
1.Up to date kit for the installation and removal of front hub bearings ,and don't need the need to dismantle the steering knuckle and strut assembly.
2.Fast and simple to use.
3.Suitable for most front wheel drive cars.
4.Heavy-duty steel drifts with black phosphate finish for corrosion resistance.
5.May be used with impact wrench.
6.Supplied in carry case.

160171:
1.Professional fitting direct on the vehicle(removal with existing wheel hub extractor or universal sliding hammer.)
2.Simple and safe handling.
3.Can also be optionally usd with a workshop press.

There are so many different types of products, you must be satisfied with it.