Search results for '28'

Name: 18V hot sell torque electric wrench
SKU: 152001
Battery Current: 1300mA
Torque: 280 N.m
Socket Size: 22*78mm
Battery voltage: 18V

160156:
 1.Fast and simple to use.
2.Suitable for most front wheel drive cars.
3.Heavy-duty steel drifts with black phosphate finish for corrosion resistance.
4.May be used with impact wrench.
5.Supplied in carry case.

160157:
1.As the spindle assembly without removed there is no need to align front end after the job is done.
2.Fit on most cars.
3.Could be worked with shop press also.

160159:
1.Quickly and easily to inserts bearing race.
2.Collars fit most standard wheel bearing size.
3.Help reduce damage to both race and axile housing.

160160:
1.Wheel Bearing Removal Tool Kit allows you to build your own custom bushing driver.
2.Select the required sizes and assemble your driver tool.
3.Build to suit the required seal,bush or bearing job.

160161:
1.This extra large driver set allows you to build your own custom bushing driver.
2.Select the required sizes and assemble your driver tool.
3.Discs are connected with a shaft and screw which connects to the driver handle.
4.Build to suit the required seal bush or bearing job.

160162:
1.Twin/triple leg puller set with reversible legs allowing internal and external pulling operations.
2.Supplied with two and three leg yokes.
3.Thrust bearing prevents wear and damage to shaft.
4.Hex head forcing screws suitable for use with a ratchet or spanner.

160163:
1.Compact set containing bearing separator,yoke and extensions.
2.Chrome Vanadium components ensure long tool life.
3.Also suitable for removing small gear,wheels and fittings from shafts.
4.Supplied in storage case.

161072:
1.Suits most flywheel,transmission and alternator piolt bearings and bushes.
2.Jaws to suit ID capacities 1/2"(12mm) to 1-1/2"(38mm).
3.Supplied in carry-case.

161073:
1.Heavy-duty construction with locking feature. Its allowing the tool to be fastened securely to the wiper arm when before commencing pull.
2.Combination of swivel mounted thrust bearing and tommy bar on thrust bolt and allow even the most stubborn wiper arms to be lifted off their drives.
3.Suitable also for battery terminal and alternator bearing removal.

161074:
1.Removes objects (bearing,etc) in narrow place.Thin type 2 jaw gear puller(range:40-90mm) that can be used for many application.
2.Removes objects (bearing,etc) in narrow place.

161075:
1.This armature bearing puller is designed for armatures on cars, and electric power tools and other electrical products.
2.Supplied with lock on bolts to hold the puller legs into position.

160184:
1.Large ball joint separator is designed for use on all cars and light trucks that have press-fit type ball joints.
2.For extracting work pieces without bore.
3.Valuable accessory for common press and pull sleeve sets.
4.Open c-shaped construction allows more flexible operation directly on vehicle compared to conventional press frames.
5.Magnetic holders on thrust plates for convenient working.
6.With impact quality M18 vibration spindle;The momentum produced by impact wrench acts like hammer strokes on the work piece,thus causing tight connections to break open can be converted for use with hydraulic spindle(un1.1/2"*16 thread),9"opening.

160186:
1.Low profile with three sizes of jaw,allows use on most modern cars and light commercial vehicles.
2.Features heavy-duty forged steel body and hardemed screw with thrust ball.
3.Supplied in carry-case.

160187:
This starter kit is the backbone to ball joint,U-joint,anchor pins,and many other general pressing operations.

160188:
This starter kit is the backbone to ball joint,U-joint,anchor pins,and many other general pressing operations.

160189:
1.The C-frame tool can be used alone to remove and universal joints.
2.Comes complete with an applicant cross reference and instructions in a blow-molded case.

160191:
This Ball Joint Removal Tool Set removes and installs the lower ball joints whilst insitu without removing parts,used for Mercedes-Benz(W220/W211/W230).