Search results for 'seat'

160229:
1.12 pieces set with 10 interchangeable heads. And it offer a large coverage of disc brake calipers fitted to today's modern vehicles.
2.Kit includes both left and right hand piston retracting forcing screws.

160230:
Alloy steel,hardened and phosphate zinc finished contents.

160231:
13pcs basic set for setting back brake pistons.
1.right threaded wind back tool.
2.suitable for many car models.

160232:
1.This tool set is used to install new brake pads.It by winding the piston back into the caliper through the convenient T-bar rotation.
2.Piston retraction is smoothly completed without damaging the piston or boot.

160233:
Applications:
AlfaRomeo,Audi,BMW,Citroen,Fiat,Ford,GM,
Honda,Jeguar,Mazda,Mercedes,Mitsubishi,Nissan,
Opel,Peugeot,Renault,Rover,Saab,Seat,Skoda,Subaru,
Toyota,Vauxhall,Volkswagen and Volvo.

160234:
1.21 pieces set with 17 interchangeable heads. And it offer a large coverage of disc brake calipers.It is fitted to today's modern vehicles.
2.Kit includes both left and right hand piston retracting forcing screws.

160235/160236/160237:
1.For rotating pistons back into caliper to provide clearance for new pads.
2.Prevents damage to the piston and boot.

160264：
Special designe for uesing before installing the accurate engine.

160265：
BMW Double VANOS Master tool set contains a comprehensive set of tools to perform camshaft+VANOS timing on M52TU,M54,M56 Engines.

160266：
The engine timing tool set designed to set the twin camshaft on petrol engine of BMW MINI.

160268：
1.Contains the tools necessary to assemble and properly time the double VANOS camshaft adjustment unit found in 1998 and later 6 cylinder engines.
2.Special design for using before installing the accurate engine.

160269：
Master tool set contains a comprehensive set of tools to perform camshaft VANOS timing on M52TU,M54,M56 Engines.

160270:
1.Installing and removal of camshaft timing unit.
2.Checking and adjustment of timing.

160271：
1.Suitable for setting and locking VAG 3.0 V6 petrol engines.
2.Quad cam configuration drives all four camshafts from the crankshaft.
3.The engine timing tool set contains camshaft and crankshaft setting and locking tools plus camshaft sprocket adjusting tool,tension adjuster and tension locking pin.
4.Supplied with warning tags.

160272：
1.Extractor for the camshaft phasing gear with 5 and 6 spokes.
2.Pulling arms 17 and 23mm.
3.This cam sprocket puller is the 3rd essential tool required when replacing the timing belt in the Audi V6 and V8 engines.

160273：
This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.

There are so many different types of products, you must be satisfied with it.

There are so many different types of products, you must be satisfied with it.