Hand Tools

160152:
1.Heavy duty drop forged, heat treated steel
2.Construction hardened and tempered

160153:
1.Mechanical puller set with 30-50mm and 50-75mm separators, and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
2.Supplied in carry-case.

160154:
1.Includes a Bearing Splitter with 4 capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom thread forcing screw.
2.Puller/Bearing set for tough jobs, up to 7-tons,and larger applications,and greater reach 8 to 16.
3.Capacity to remove steering stem bearing.

160155:
1.Mechanical puller set with 30-50mm and 50-75mm separators and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
3.Supplied in carry-case.

160229:
1.12 pieces set with 10 interchangeable heads. And it offer a large coverage of disc brake calipers fitted to today's modern vehicles.
2.Kit includes both left and right hand piston retracting forcing screws.

160230:
Alloy steel,hardened and phosphate zinc finished contents.

160231:
13pcs basic set for setting back brake pistons.
1.right threaded wind back tool.
2.suitable for many car models.

160232:
1.This tool set is used to install new brake pads.It by winding the piston back into the caliper through the convenient T-bar rotation.
2.Piston retraction is smoothly completed without damaging the piston or boot.

160233:
Applications:
AlfaRomeo,Audi,BMW,Citroen,Fiat,Ford,GM,
Honda,Jeguar,Mazda,Mercedes,Mitsubishi,Nissan,
Opel,Peugeot,Renault,Rover,Saab,Seat,Skoda,Subaru,
Toyota,Vauxhall,Volkswagen and Volvo.

160234:
1.21 pieces set with 17 interchangeable heads. And it offer a large coverage of disc brake calipers.It is fitted to today's modern vehicles.
2.Kit includes both left and right hand piston retracting forcing screws.

160235/160236/160237:
1.For rotating pistons back into caliper to provide clearance for new pads.
2.Prevents damage to the piston and boot.

1. Area/Volume/Pythagorean measurement is available.
2. Continuous measurement(Max./Min. measurement) is accessible.
3. Addition/Subtraction(Distance/Area/Volume) can be offered.
4. Battery status and signal strength can be seen in display.

Name: Extra long arm allen key wrench
SKU: 351017
Head type: Torx
Type: Extra long type
Advantage: Longer length,more convenient to insert into the nut.