Suchergebnisse für '12'

161072:
1.Suits most flywheel,transmission and alternator piolt bearings and bushes.
2.Jaws to suit ID capacities 1/2"(12mm) to 1-1/2"(38mm).
3.Supplied in carry-case.

161073:
1.Heavy-duty construction with locking feature. Its allowing the tool to be fastened securely to the wiper arm when before commencing pull.
2.Combination of swivel mounted thrust bearing and tommy bar on thrust bolt and allow even the most stubborn wiper arms to be lifted off their drives.
3.Suitable also for battery terminal and alternator bearing removal.

161074:
1.Removes objects (bearing,etc) in narrow place.Thin type 2 jaw gear puller(range:40-90mm) that can be used for many application.
2.Removes objects (bearing,etc) in narrow place.

161075:
1.This armature bearing puller is designed for armatures on cars, and electric power tools and other electrical products.
2.Supplied with lock on bolts to hold the puller legs into position.

Name: 7pcs long ball end hex allen wrench
SKU: 351012
Head type: Ball
Type: Standard
Advantage: Double head available, wide range of use

Name: Single ball head long 2mm allen wrench
SKU: 351035-351060
Head type: Ball
Type: Long type
Advantage:  Ball-ends for precision

160264：
Special designe for uesing before installing the accurate engine.

160265：
BMW Double VANOS Master tool set contains a comprehensive set of tools to perform camshaft+VANOS timing on M52TU,M54,M56 Engines.

160266：
The engine timing tool set designed to set the twin camshaft on petrol engine of BMW MINI.

160268：
1.Contains the tools necessary to assemble and properly time the double VANOS camshaft adjustment unit found in 1998 and later 6 cylinder engines.
2.Special design for using before installing the accurate engine.

160269：
Master tool set contains a comprehensive set of tools to perform camshaft VANOS timing on M52TU,M54,M56 Engines.

160270:
1.Installing and removal of camshaft timing unit.
2.Checking and adjustment of timing.

160271：
1.Suitable for setting and locking VAG 3.0 V6 petrol engines.
2.Quad cam configuration drives all four camshafts from the crankshaft.
3.The engine timing tool set contains camshaft and crankshaft setting and locking tools plus camshaft sprocket adjusting tool,tension adjuster and tension locking pin.
4.Supplied with warning tags.

160272：
1.Extractor for the camshaft phasing gear with 5 and 6 spokes.
2.Pulling arms 17 and 23mm.
3.This cam sprocket puller is the 3rd essential tool required when replacing the timing belt in the Audi V6 and V8 engines.

160273：
This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.