Suchergebnisse für 'bearing'

1. The surface treatment of the gear puller has many ways.
2. The gear puller can protect the equipment.
3. The three jaws gear puller makes the stress of the equipment balance.
4. The double holes gear puller can adjust.

160193:
1.Four collets which fit a wide range of applications.
2.Select the appropriate sized collet by comparing it with the application.
3.Insert the collet,expand it to fit the hole,then attach the slide hammer assembly.
4.Housed in a blow-molded plastic storage case.

160194:
Locking the nut to open 3-jaws and clip on the bearing and then use the slide hammer to pull out the bearing.

160195:
1.Comprehensive kit offering leg style and slide hammer pulling assemblies for use with expanding split collets.
2.Removes bearings easily where access is available in the centre of the bearing.
3.Collet expands and grips on the underside of the bearing.

160196:
1.Medium stroke 1.4kg slide hammer with 390mm shaft.
2.Bearing extractor collets with internal capacity from 9 to 34mm.
3.Supplied in carry-case.

160198:
1.Pulls flange-type rear axles and most front-wheel drive hubs.
2.Internal and external jaws provide a variety of combinations to pull bearings and gears and seals.
3.Two-and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
4.Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.

160199:
1.Suitable for the fast and safe removal of Bosch,Delphi,Denso and Siemens diesel injectors.
2.Ball joint allows hammer to be used in confined areas.
160200:
1.Use to remove stubborn diesel injector.
2.No need too remove cam cover and the use of slide hammer.
3.For mercedes C-class,Sprinter Vehicles and chrysler grand cherokee 27crd(00-)

160164:
1.This master combination puller set has all the pulling attachments for the many pulling applications on cars, trucks, farm equipmnt and other machinery.
2.Features two and three way internal and external heads,reversible cone,forcing screw and three different sets of legs.

160165:
1.For removal of stubborn air conditioning clutch pulleys.
2.Also used on many alternator,generator,power steering and so on.
3.Set includes drop-forged components:one 3/4"-16*5" live-center forcing screw, and 5-1/2" crossbar with three spread setting, and two pairs of jaws,and aclamp bolt.
4.Includes blow-molded plastic case.

160167:
Application also with workshop press+press frame.

160168:
1.Universal applications-Car-LCV
2.Supplied in mould storage case.

161069:
Application also with workshop press+press frame.

160170:
1.Up to date kit for the installation and removal of front hub bearings ,and don't need the need to dismantle the steering knuckle and strut assembly.
2.Fast and simple to use.
3.Suitable for most front wheel drive cars.
4.Heavy-duty steel drifts with black phosphate finish for corrosion resistance.
5.May be used with impact wrench.
6.Supplied in carry case.

160171:
1.Professional fitting direct on the vehicle(removal with existing wheel hub extractor or universal sliding hammer.)
2.Simple and safe handling.
3.Can also be optionally usd with a workshop press.

160152:
1.Heavy duty drop forged, heat treated steel
2.Construction hardened and tempered

160153:
1.Mechanical puller set with 30-50mm and 50-75mm separators, and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
2.Supplied in carry-case.

160154:
1.Includes a Bearing Splitter with 4 capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom thread forcing screw.
2.Puller/Bearing set for tough jobs, up to 7-tons,and larger applications,and greater reach 8 to 16.
3.Capacity to remove steering stem bearing.

160155:
1.Mechanical puller set with 30-50mm and 50-75mm separators and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
3.Supplied in carry-case.