Suchergebnisse für '320'
-
Good abrasion resistance fretboard radius sanding block types 612038
1.High strength .
mehr dazu
2.Low cost good abrasion resistance with a high cost performance.
3.High grinding efficiency.
4.Comfortable hold grip. -
High Quality Gearbox Bearing Puller 160040
1.Carbon steel.
mehr dazu
2.Gray phosphating surface.
3.Drop forged.
4.Hardened and tempered. -
Widely used and good car battery charger 601088
1. Axial fan cooling, long charging, to ensure safe use.
mehr dazu
2. The battery is fully charged automatically stops to prevent over-charging.
3. Automatically stop when the output voltage reaches 14.4 V power to effectively prevent damage to the vehicle electronics.
4. The instantaneous output current up to 100A, used as auxiliary fast start. -
Cheap And High Quailty Professional BMW Timing Tool 160255
160256：
1.Tool remains on the spring strut until all screwa are tightens,therefore no recalibration required.
2.Made of high quality aluminum.160263：
mehr dazu
Checking and adjustment of engine timing when installing and removal of camshaft timing unit. -
Many Kinds Of China Engine Timing Tool 160274
160274:
1.Installing and removal of camshaft/variable camshaft timing unit.
2.Checking and adjustment of timing.160275:
The Engine Timing Tool Set includes adjusting gauge for camshaft,crankshaft,pumpshaft
complete classification chart included
for e.g:1.4ltr. + 1.6ltr 16V +1.7ltr. +1.8ltr.16V+2.0ltr.16V(also Zetec)-1.4lre.-1.6ltr.-1.8ltr.and 1.9 ltr.D/TD/TDCi160276:
This new kit of twelve tools is required for petrol and diesel engine service including timing belt replacement on recent models and also older 1.9D models from 1976.160277:
The Engine Timing Tool for fast and professional dis-assembly and assembly of SAC clutches-fits on nearly all SAC clutches with 3-and 4-hole pitch from VAG,MB,Opel Volvo,Renault etc.160278:
1.For easy alignment and installation on the workbench.
2.Suitable for front wheel drive vehicles.160280:
For replacing the cam belt on Ford Focus 1.6 TI-VCT engines,engine code HXDA(2003-2007) and 2.0 TDCI with engines codes G6DA,G6DB,G6DC 2003-2007160281:
1.Necessary for pre-tensioning self adjusting clutches before removal or installation.
2.Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.
3.Features a refitting tool,allowing the clutch adjuster to be wound back,and six alignment adaptors.
4.Supplied in carry-case.160282:
mehr dazu
1.The Engine Timing Tool Set includes a removing flange, and plus forcing screws and adapter assemblies to remove and install virtually all virtually.
2.Includes blow-molded plastic case.