Suchergebnisse für '161'

160152:
1.Heavy duty drop forged, heat treated steel
2.Construction hardened and tempered

160153:
1.Mechanical puller set with 30-50mm and 50-75mm separators, and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
2.Supplied in carry-case.

160154:
1.Includes a Bearing Splitter with 4 capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom thread forcing screw.
2.Puller/Bearing set for tough jobs, up to 7-tons,and larger applications,and greater reach 8 to 16.
3.Capacity to remove steering stem bearing.

160155:
1.Mechanical puller set with 30-50mm and 50-75mm separators and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
3.Supplied in carry-case.

161045;
1.Cast puller yoke with forged separator.
2.10tonne hydraulic ram interxhangeable with other units in the series.
3.Supplied with 75-105mm bearing separator.
4.Maximum puller depth 420mm.

161046;
1.Forged steel bearing separator.
2.10ton Ram with enough force to remove most stubborn bearings,pulleys and shafts.
3.Packed in handraulic storage/carry-case.

161047
1.Supplied with 10tonne hydraulic ram.
2.Suitable for pulling commercial vehicle size bearings from 105-150mm.
3.Hydraulic ram interxhangeable with other sets in the range.
4.Maximum depth 420mm.Supplied in steel case.

160148
1.Forged steel 2-way yoke allows twin or triple leg pulls.
2.10ton Hydraulic power unit with tommy bar.
3.Suitable for pulling hubs,flanges,gears and bearings.
4.Supplied with 3*3 position puller arms and 3 sets of extension plates.
5.Maximum reach 250mm.

160149
1.Chromed,heat treated SAE1045 steel puller yoke with hydraulic ram.
2.Suitable for four and five stud hubs.
3.Hydraulic ram provides additional power to extract the most stubborn hubs.
4.Supplied in storage case.

160151
1.Readily adjustable sliding legs to pull wheel hubs more quicker & easier where the bolt circle does not exceed 7-1/2"(190.2mm) also removers press-fit rear break drums.
2. Striking handle & puller screw included.
3. Special designed to use on most models of car.
4. Provides a straight pull, will not distort wheel lugs.
5. Striking wrench and puller screw included.

There are so many different types of machines, you must be satisfied with it.

161086
High quality chrome steel drop forged,heat treatment