Suchergebnisse für 'car plastic scratch repair machine SKU 601044'

161045;
1.Cast puller yoke with forged separator.
2.10tonne hydraulic ram interxhangeable with other units in the series.
3.Supplied with 75-105mm bearing separator.
4.Maximum puller depth 420mm.

161046;
1.Forged steel bearing separator.
2.10ton Ram with enough force to remove most stubborn bearings,pulleys and shafts.
3.Packed in handraulic storage/carry-case.

161047
1.Supplied with 10tonne hydraulic ram.
2.Suitable for pulling commercial vehicle size bearings from 105-150mm.
3.Hydraulic ram interxhangeable with other sets in the range.
4.Maximum depth 420mm.Supplied in steel case.

160148
1.Forged steel 2-way yoke allows twin or triple leg pulls.
2.10ton Hydraulic power unit with tommy bar.
3.Suitable for pulling hubs,flanges,gears and bearings.
4.Supplied with 3*3 position puller arms and 3 sets of extension plates.
5.Maximum reach 250mm.

160149
1.Chromed,heat treated SAE1045 steel puller yoke with hydraulic ram.
2.Suitable for four and five stud hubs.
3.Hydraulic ram provides additional power to extract the most stubborn hubs.
4.Supplied in storage case.

160151
1.Readily adjustable sliding legs to pull wheel hubs more quicker & easier where the bolt circle does not exceed 7-1/2"(190.2mm) also removers press-fit rear break drums.
2. Striking handle & puller screw included.
3. Special designed to use on most models of car.
4. Provides a straight pull, will not distort wheel lugs.
5. Striking wrench and puller screw included.

Name: 422J electric nailer stapler
SKU: 150006
Power: 1500W-1800W
Magazine Capacity: 100pcs
Nail Length: 10-22mm
Crown Width: 5.2mm

363126 Technical Data
Cartrodge size:110x90x10mm.
Viewing area:98x48mm.
Weight:490g.
Light state:DIN4.
Dark state:DIN9-13.
UV/IR protection:DIN16.
Switching time:1/25000s.
Delay time:0.1-1.0s.
Power supply:Battery&Solar power.

363127 Technical Data
Cartrodge size:110x90x10mm.
Viewing area:100x50mm.
Weight:490g.
Light state:DIN4.
Dark state:DIN9-13.
UV/IR protection:DIN16.
Switching time:1/25000s.
Delay time:0.1-1.0s.
Power supply:Battery&Solar power.

Name: 14PCS master universal ball joint puller set
SKU: 138550
Content:
1PC-Frame Screw (1/4 " & 3/4" Long Frame Press)
4PCS-Receiving Tube: 1-3/4", 2-1/4", 2-1/2", 2-3/4"
5PCS-Receiving Tube: 2-1/4", 1-3/4", 1-7/16 ", 2-3/4", 2-1/4"
4PCS-Receiving Cups:2", 2-5/8", 1-1/4", 1-3/4"